MICRO-EPSILON interferoMETER IMS5400-DS Скачать руководство пользователя страница 3

Страница: 3 / 20

Page 3

General

IMS5x00

General

Symbols used

The following symbols are used in this document:

CAUTION

Indicates a hazardous situation which, if not avoided, may result in minor or moderate injury.

NOTICE

Indicates a situation that may result in property damage if not avoided.

Indicates a user action.

Indicates a tip for users.

Measure

Indicates hardware or a software button/menu.

Warnings

CAUTION

Connect the power supply and the display/output device according to the safety regulations for
electrical equipment.

> Risk of injury, damage to or destruction of the controller

NOTICE

The supply voltage must not exceed the specified limits.

> Damage to or destruction of the controller
Avoid shocks and impacts to the sensor and the controller.

> Damage to or destruction of the components
Never kink optical fibers or bend them in thight radii.

> Damage to or destruction of the optical fibers; failure of measurement device
Protect the ends of the optical fibers against contamination

> Failure of the measuring device
Protect the cable against damage.

> Failure of the measuring device

Содержание interferoMETER IMS5400-DS





















Результаты поиска

Содержание interferoMETER IMS5400-DS

Отзывы:

Похожие инструкции для interferoMETER IMS5400-DS

Бренды по названию

Популярные бренды

MICRO-EPSILON interferoMETER IMS5400-DS, Быстрое руководство

Результаты поиска

Содержание interferoMETER IMS5400-DS

Отзывы:

Похожие инструкции для interferoMETER IMS5400-DS

Бренды по названию

Популярные бренды