Page 12
Installation and Assembly
optoCONTROL EDU190
4.
Installation and Assembly
Place the digital display on a stable surface during installation.
Use the cut out dimensions in the technical data, see operating instructions.
Install the digital display into the panel cut-out.
Secure the digital display by screwing the recesses head screw clockwise, allowing the built-in bracket
to flip out and tighten against the cabinet.
Tighten the screws from 0.5 to 1.0 Nm.
4 (or 8) screws
Fig. 1 Installation of digital display
Avoid use in Ex areas.
> Death or injury due to explosion hazard
Avoid use in direct sunlight, strong magnetic fields, high temperatures and sudden temperature changes.
> Color alterations on the display or system failure
WARNING
