MICRO-EPSILON eddyNCDT 3060 Скачать руководство пользователя страница 22

Страница: 22 / 24

Page 22

Service, Repair

eddyNCDT 306x / 307x

Service, Repair

In the event of a defect on the controller, sensor or

sensor cable, the parts concerned must be sent back

for repair or replacement. In the case of faults the cause

of which is not clearly identifiable, the whole measuring

system must be sent back to

MICRO-EPSILON MESSTECHNIK

GmbH & Co. KG

Koenigbacher Str. 15

94496 Ortenburg / Germany

Tel. +49 (0) 8542 / 168-0

Fax +49 (0) 8542 / 168-90

[email protected]

www.micro-epsilon.com

Liability for Material Defects

All components of the device have been checked and

tested for functionality at the factory. However, if defects

occur despite our careful quality control, MICRO-EPSI-

LON or your dealer must be notified immediately.

The liability for material defects is 12 months from deliv-

ery. Within this period, defective parts, except for wear-

ing parts, will be repaired or replaced free of charge, if

the device is returned to MICRO-EPSILON with shipping

costs prepaid. Any damage that is caused by improper

handling, the use of force or by repairs or modifica-

tions by third parties is not covered by the liability for

material defects. Repairs are carried out exclusively by

MICRO-EPSILON.

Further claims can not be made. Claims arising from the

purchase contract remain unaffected. In particular, MI-

CRO-EPSILON shall not be liable for any consequential,

special, indirect or incidential damage. In the interest

of further development, MICRO-EPSILON reserves the

right to make design changes without notification.
For translations into other languages, the German ver-

sion shall prevail.

Содержание eddyNCDT 3060

























Результаты поиска

Содержание eddyNCDT 3060

Отзывы:

Бренды по названию

Популярные бренды

MICRO-EPSILON eddyNCDT 3060, Быстрое руководство

Результаты поиска

Содержание eddyNCDT 3060

Отзывы:

Бренды по названию

Популярные бренды