manualshive.com logo in svg

MICRO-EPSILON confocalDT 2421, Быстрое руководство

Поделиться
Скачать
MICRO-EPSILON confocalDT 2421 Скачать руководство пользователя страница 20

MICRO-EPSILON MESSTECHNIK GmbH & Co. KG
Koenigbacher Str. 15 · 94496 Ortenburg/Germany
Tel. +49 (0) 8542/168-0 · Fax +49 (0) 8542/168-90
[email protected] · www.micro-epsilon.com 
Your local contact: 

www.micro-epsilon.com/contact/worldwide/

X9691367-A012110HDR

MICRO-EPSILON MESSTECHNIK

Liability for Material Defects 

All components of the device have been checked and tested for 
functionality at the factory. However, if defects occur despite our 
careful quality control, MICRO-EPSILON or your dealer must be 
notified immediately.
The liability for material defects is 12 months from delivery. 
Within this period, defective parts, except for wearing parts, will 
be repaired or replaced free of charge, if the device is returned 
to MICRO-EPSILON with shipping costs prepaid. Any damage 
that is caused by improper handling, the use of force or by 
repairs or modifications by third parties is not covered by the 
liability for material defects. Repairs are carried out exclusively 
by MICRO-EPSILON. 
Further claims can not be made. Claims arising from the 
purchase contract remain unaffected. In particular, MICRO-
EPSILON shall not be liable for any consequential, special, 
indirect or incidental damage. In the interest of further develop-
ment, Micro-Epsilon reserves the right to make design changes 
without notification. For translations into other languages, the 
German version shall prevail. 

Service, Repair

If the sensor, controller or sensor cable is 
defective:

 - If possible, save the current sensor set-

tings in a parameter set to reload them 
into the controller after the repair.

 - Please send us the affected parts for 

repair or exchange. 

If the cause of a fault cannot be clearly 
identified, please send the entire measuring 
system to:
MICRO-EPSILON MESSTECHNIK  
GmbH & Co. KG

Königbacher Straße 15 
94496 Ortenburg / Germany

Содержание confocalDT 2421





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды