MODEL MC1500 SPECIFICATIONS
INPUT VOLTAGE:
208-230V / 460V 60Hz 3 Phase
MAX. CURRENT:
12.0 Amps at 208-230V
6.0 Amps at 460V
MOTOR:
TEFC 5HP, 3 Phase
COMPRESSED AIR:
80 psi. minumum, 90 psi. maximum. 1/4” NPT male
nipple connection. Clean, dry air requried.
FILTER AREA:
174 sq. ft. per cartridge fi lter (348 sq. ft. total)
DIMENSIONS: 48” h. X 25-1/2” w. X 32-1/2” l.
SHIPPING WEIGHT: 525 lbs.
ACTUAL WEIGHT: 475 lbs.
PACKAGE CONTENTS:
1 Ea. MC1500
OPTIONS (These items are separately packed):
1 ea. 8” dia., 7’ Arm Assembly
1 ea. 8” dia., 9’ Arm Assembly
2 ea. 6” dia., 7’ Arm Assembly
2 ea. 6” dia., 9’ Arm Assembly
Caution:
All electrical work must be done by a
qualifi ed electrician according to local, state
and national codes.
PRE-OPERATING INSTRUCTIONS:
NOTE: The following instructions will vary depending on
options received.
1. Remove the shipping crate, shipping straps and plastic
wrapping from the unit.
2. Remove the MC1500 from the shipping skid and set on
a level surface.
3. Remove the attachment option from the shipping
carton.
4. Install the arm assembly onto the base unit (Fig. 1A).
5. Insert the lamp plug on the arm into the receptacle
located directly behind the base of the arm on the
MC1500. Secure the arm cable in clamp provided on
mounting plate (Fig. 1B).
OPERATING INSTRUCTIONS:
1. Choose a suitable, level place near the workstation and
position the unit so that the hose/arm assembly will be
placed near the source of pollution being generated.
The MC1500 has locking wheels at the front handle
end. The wheels are locked by stepping down on the
fl at plate on the wheels.
2. Grasp the hood by the handle ring and position within
18” of the source of pollution.
3. Plug the power cord into a outlet of the appropriate
voltage and phase.
MICRO AIR
®
MC1500
CLEAN AIR SYSTEMS
!
2
Fig. 1A
Fig. 1B
Bolt
Connect hose to unit
using hose clamp.
Flat Washer
Lock Washer
