MICRO-AIR MAE2200, Руководство пользователя

Страница: 6 / 8

6
MAE2200
®
TROUBLESHOOTING CHART
CAUTION: BEFORE DISASSEMBLING THE UNIT OR DOING ANY
INSPECTION OF THE PARTS, MAKE CERTAIN THAT THE POWER HAS BEEN
CUT OFF, AND THE BLOWER HAS COME TO A COMPLETE STOP.
NEVER
RUN THE UNIT WITH THE ACCESS DOOR OPENED OR REMOVED.
PROBLEM POSSIBLE CAUSE REMEDY
Unit Fails to Start Dead Power Line Check Circuit and Switch
Blown Fuse Replace Fuse
Loose Wire in Terminal Box Reconnect Wire
Burned Out Motor Replace Motor
Unit Runs Slowly or Inadequate Wired for Wrong Voltage Check Input Voltage
or Improper Rotation Check Wiring Diagram
Dirty Filters Replace Filters
(See Changing Filters Section.)
Obstruction in Hose/Arm Assembly Reach into Hood and Remove
Obstruction
Mist Coming from Exhaust Dirty Disposable Filters Replace Filters
or Torn Filters
Air Bypass Around Filters Add Foam Seal to Seal Gaps
Vibration Loose Mounting Bolts Tighten Bolts
Foreign Object in Blower Remove Access Door and
Remove Object
Dirty Disposable Filters Replace Filters
(See Maintenance Section.)
Obstruction in Hose/Arm Assembly Reach into Hood and Remove
Obstruction