MICRO-AIR CLEAN AIR BOOTH, Руководство по установке

Страница: 7 / 18

7
BOOTH ASSEMBLY MICRO AIR
3.
Seat horizontal supports at the front of the top panel segment (Skip this step for 8’ W
booths). Bolt together the horizontal supports with the horizontal support brace (12 bolts
total, see
FIG. 7 ).
NOTE:
The horizontal support braces will have holes on the top flange. 8’ W booths do not
include horizontal support braces.
FIG. 7
4. With top panel segment and support braces together, use c-clamp pliers to hold assembly
together prior to transfer onto the CAB module and side panels (see
FIG. 8 ). If no c-clamps
are available it is possible to use bolts and nuts provided to keep the assembly secure but
they will need to be removed prior to bolting on the next top panel segments (see
FIG. 9 ).
NOTE: For ease of assembly it is suggest to assemble each top panel segment in front of
CAB/BOOTH unit.
FIG. 8
¼” Hardware
Horizontal Support
Brace
C-clamp Pliers
Horizontal Support
Top
Panel
Top
Panel
Horizontal
Support