MICRO-AIR CLEAN AIR BOOTH, Руководство по установке

Страница: 4 / 18

4
BOOTH ASSEMBLY MICRO AIR
INSTALLATION
1. Assemble side panels to CAB module with the appropriate 1/4" hardware (See FIG. 1 ). Each
panel is bolted on in twelve places onto the CAB module. Bolt through holes closest to the
inside flange of the side panels. Make sure side panels are flush with CAB module at the
bottom. Side panels should stick out 1.25” from CAB side wall. Bolt down side panels to
ground using at least 2 anchors per panel (see
FIG. 2 ). Anchors are NOT provided.
NOTE:
For booths with a single CAB module, install back panels to CAB module first.
Stand back panels next to CAB module. Use cabinet connection plate to install the back
panels to the CAB module (see
FIG. 3 ). Once the back panels are installed, bolt side
panels to the back panels.
FIG. 1
¼” Hardware
CAB
Module
Side
Panel
Side
Panel
CAB
Module
¼” Hardware