KSZ8864 Evaluation Board User’s Guide
Micrel Inc.
Page 21
5/9/2014
5.5 MDC/MDIO SMI Software Tool
5.5.1 MDC/MDIO SMI software
The software tool can be used to access all registers of KSZ8864 by MDC/MDIO interface. This
tool locate in folder of MDC_MDIO SMI in the Design Kit, there is MicrelSMIIfApp.exe file
which can be executed directly by clicking its icon.
5.5.2 On board jumper setting and Software Application
Before run the software tool, the JP2, JP3 and JP4 should be closed, please check the MDC/MDIO
setting in section of 4.7 MIIM SMI mode and pins PS[1:0]=01, JP8 should be closed also. After
click its icon, a Window will pop up as follow:
There are two options:
(1)
KSZ8873 3 port switch
(2)
KSZ8895 5-port switch
(3)
KSZ8864 4-port switch
Please select (3) to support KSZ8864 configuration by SMI mode.
Type ‘help’ and press Enter, will display all commands as follow.
