Micrel Confidential
2
June 2006
KSZ8862-16 MQL Demo Quick Start Guide
KSZ8862-16 MQL Demo Quick Start Guide
Demo Set-up and Getting Started
The KSZ8862-16MQL demo board set up as shown in the Figure 1.
PC with Windows
98, 2000 or XP
Ethernet Cable
KSZ8862-16 Demo Board (10FL_100SX)
RS232 Cable
Figure 1: KSZ8862-16MQL Demo Set Up
Please perform the following steps to power on the Demo Board.
1. Connect the RS-232 serial cable between the PC and the Demo Board.
2. Connect the Ethernet cable between the PC and the Demo Board.
3. On the PC, open the Hyper Terminal as follows:
Go to: Start -> Programs -> Accessories -> Communications -> HyperTerminal and click
on Hyper Terminal
Type in a name at the prompt e.g. “KSZ8862 Demo” and press OK
Select COM1 port and press OK
Fill in the COM1 Properties parameters as shown in Figure 2 and press OK
4. Plug in the 7.5V DC jack to power on the KSZ8862M 10FL_100SX demo board
