MICHIGAN Ravenger 1950 Скачать руководство пользователя

Страница: 15 / 28

Ravenger 1950 Wood Chipper and Shredder

E&OE

Frequency –

Whichever Comes First

Component/Task

Every Use

First Month or

20 Hours Use

Every 3 Months

or 50 Hours Use

Every 6 Months or

100 Hours Use

Every Year or

300 Hours Use

Fuel Strainer

Check

Blade Shaft

Lubricate

Drive Belt

Check/adjust as

necessary

Checking and Changing Engine Oil

The product is NOT supplied with engine oil, although traces of oil from the

manufacturing process may be present. It is essential to add adequate engine oil of the

correct type to the engine before use.

Failure to add engine oil will void the product warranty

. •

Always check engine oil level when the machine is in an upright position on a flat and level surface. •

Do not use used or contaminated engine oils. • Use only engine oils of the correct type (see

Specifications

). • Perform the first oil change within the first 20 hours of use. Subsequently, change the

oil every 20 hours of use. • It is recommended that the engine be warm, but not hot, when performing oil

changes. When the oil is warm it drains faster. • Using dirty or incorrect engine oil may cause engine

damage and void any warranty • Always use suitable tools. • Always dispose of used oil in an

environmentally responsible manner and according to regulations.

Four-stroke engines require engine oil in the crankcase for lubrication of internal components. Severe

or irreparable damage may occur if the engine is allowed to run without engine oil. The engine oil level

requires regular maintenance as per the maintenance schedule.

To check engine oil level:

1. Place the machine in an upright position on a flat and level

surface.

2. Clean the machine around the oil filler cap (

) so that no dirt or

other material enters the engine when the cap is removed.

3. Remove the oil filler cap (rotate left) until fully unscrewed. For

machines without a dipstick, the oil level is determined by how

close the oil is to the filler hole (

). The lower limit is indicated by

(

), the upper limit by (

). For machines equipped with an oil level

dipstick:

a. Wipe the dipstick (

) clean with a piece of cloth or paper.

b. Insert the dipstick into the oil filler but do not screw it in.

c. Remove and inspect the dipstick – the oil level is determined

by where oil can be seen on it.

4. Ensure that the oil level is at or just under the permissible maximum. If the oil level is low, add

additional oil until the correct level is reached. If the oil level is too high, drain some oil until the

correct level is reached.

5. When finished, reinstall (rotate right) the oil filler cap until firm. Wipe off any residual oil from the

machine.

To change the engine oil:

MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN

Содержание Ravenger 1950





























Результаты поиска

Содержание Ravenger 1950

Отзывы:

Похожие инструкции для Ravenger 1950

Бренды по названию

Популярные бренды

MICHIGAN Ravenger 1950, Руководство пользователя

Результаты поиска

Содержание Ravenger 1950

Отзывы:

Похожие инструкции для Ravenger 1950

Бренды по названию

Популярные бренды