MICHIGAN Ravenger 1950 Скачать руководство пользователя

Страница: 23 / 28

Ravenger 1950 Wood Chipper and Shredder

E&OE

Cleaning Guidelines

Do not use solvents, chemicals or abrasives when cleaning the machine, as some surfaces

may be damaged. • Do not use high-pressure sprayers near the blade shaft bearings as

bearing damage may result. • Wear gloves or use suitable tools to assist in cleaning – do not use bare

hands. • Clean the machine after every use to ensure best performance and longest service life. • Avoid

tilting the machine to avoid potential fuel or oil spills or leaks.

•

Use a slightly damp cloth, water and mild detergent for cleaning.

•

Use a brush for parts that are difficult to reach.

•

Ensure air vents and surfaces designed for heat dissipation are clean and free of obstructions or

debris.

•

It is recommended to lightly oil the cutting blades after each use to help prevent corrosion.

•

Ensure all chutes and flaps are clean and not obstructed.

•

Ensure that all control cables, levers, switches etc are clean and operate normally and smoothly.

Transportation and Storage

Always ensure that the machine is cool enough to touch before transporting or

storing. • Petrol/fuel/gasoline is extremely flammable – keep clear of naked

flames or other ignition sources.

Preparing for Transport and Storage

•

Clean the equipment before transport or storage.

•

Disconnect the spark plug lead.

•

Store the equipment in a dry, well-ventilated area and out of the reach of children.

Long Term Storage

1. Follow the normal procedures for storage, then:

•

Drain the fuel system. It is advised to have the fuel tank as empty as possible before draining.

a. Unscrew (rotate left) the carburettor drain plug. Use a suitable container to catch the draining

fuel, and allow the fuel to drain. Store the drained fuel in a properly sealed container.

b. Re-install (rotate right) the carburettor drain plug and tighten.

2. Remove the spark plug and put 30ml of clean engine oil into the cylinder. Pull the starter rope

slowly to distribute the oil. Re-install the spark plug.

3. Lubricate the blade shaft bearings.
4. Cover the equipment to protect it from dirt and dust.

MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN

Содержание Ravenger 1950





























Результаты поиска

Содержание Ravenger 1950

Отзывы:

Похожие инструкции для Ravenger 1950

Бренды по названию

Популярные бренды

MICHIGAN Ravenger 1950, Руководство пользователя

Результаты поиска

Содержание Ravenger 1950

Отзывы:

Похожие инструкции для Ravenger 1950

Бренды по названию

Популярные бренды