MICHIGAN Ravenger 1950 страница 16 Скачать руководство пользователя

Страница: 16 / 28

Ravenger 1950 Wood Chipper and Shredder

E&OE

1. Place the machine on a suitable work surface that is flat and level and have a container ready to

catch drained oil.

2. Clean the machine around the oil drain plug (

) and oil filler (

) so that no dirt or other material

enters the engine when the plug or cap is removed.

3. Unscrew (rotate left) and remove the drain plug and washer.

4. Tilt the machine and drain all oil from the engine. Once drained, allow the machine to sit level again.

5. Clean the drain plug and washer and then reinstall them. Screw in fully (rotate right) and firmly

tighten.

6. Remove the oil filler cap (rotate left) until fully unscrewed. Wipe the oil level indicator clean with a

piece of cloth or paper.

7. Using a funnel, carefully add oil to the engine until the permissible maximum is reached. Double-

check the oil level (described above).

8. When finished, reinstall (rotate right) the oil filler cap until firm. Wipe off any residual oil from the

machine.

Checking, Cleaning or Replacing the Air Filter

Operating the machine without a functional air filter may cause severe engine damage and will

void any warranty. • A dirty or oil saturated air filter will restrict air flow, which can be mistaken

as fuel system problems. Check the condition of the air filter before adjusting engine idle speed, where

applicable. • If the air filter is damaged (torn, broken, disintegrating), replace it.

The air filter is used to prevent dirt and other particles from possibly entering the engine and causing

internal damage to it. The air filter requires regular maintenance as per the maintenance schedule.

Air Filter Inspection and Cleaning

Inspect the air filter for dirtiness and debris, damage etc. Clean or replace the filter element as

necessary. To clean air filters:

•

For foam filters, wash the filter in warm water and mild detergent, then rinse and allow to dry.

•

For paper filters, use compressed air to blow particles from it, if possible. The air should be blown

from the engine side of the filter. Tapping the filter element against a hard surface and brushing the

pleats using a soft brush may also help remove debris from the filter.

•

For foam filters, place a few drops of clean engine oil on the filter then squeeze it a few times to

spread the oil through the filter material and remove any excess oil.

•

It is recommended to clean the air filter cover and air intake assembly of any dirt, cuttings etc.

To remove the air filter:

1. Remove (rotate left) the wing-nut (

) securing the air filter cover (

), then remove the cover from

the air intake assembly.

2. Remove (rotate left) the wing-nut (

) securing the air filter element (

), then remove the filter

element from the air intake assembly.

To install the air filter:

MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN

Содержание Ravenger 1950





























Результаты поиска

Содержание Ravenger 1950

Отзывы:

Похожие инструкции для Ravenger 1950

Бренды по названию

Популярные бренды

MICHIGAN Ravenger 1950, Руководство пользователя

Результаты поиска

Содержание Ravenger 1950

Отзывы:

Похожие инструкции для Ravenger 1950

Бренды по названию

Популярные бренды