![background image](http://html.mh-extra.com/html/michigan-pneumatic-tool/mp-hs-1sc/mp-hs-1sc_manual_1784716010.webp)
10
Lubrication
1. Each time a tool is dis-
assembled for maintenance
or repair, the tool must be
lubricated.
2. Apply 6-8 drops of air tool oil
into the inlet prior to and after
each use
(see figure 10.2).
Air Supply
1. Always use clean, dry air
at 90 psig (6.2 bar/620kPa)
maximum air pressure.
2. Be sure all hoses and fittings
are the correct size and are
secured tightly.
3. Always use a Filter, Regulator,
Lubricator
(see figure 10.1).
Maintenance
Compressor
Air Tank
Air
Dryer
Main
Pipe
Valve
Higher than
1/100 inclination
Pressure
Regulator
Drain
Tank
Filter
Bigger Hose Better
Tool
Figure 10.1
Figure 10.2
Содержание MP-HS-1SC
Страница 15: ...15 Notes ...