OptiCal User’s Manual
Michell Instruments
11
OPERATION
3.2 Start-Up
After installing the calibration instruments, switch on the OptiCal by using the
ON/OFF
switch on the rear panel of the instrument.
3.3
Local Control of Chamber Temperature and Humidity Set Points
The desired percentage of relative humidity and temperature (in °C) can be manually
set by using the humidity and temperature setting switches when the
AUTO/MAN
switches are in the
MAN
position. Humidity or temperature control can be enabled or
disabled individually using the associated
ON/OFF
switch.
NOTE: Suffi cient time must be allowed for the OptiCal to thermally stabilize
before monitoring the humidity and temperature readings.
Chamber Set
Humidity
Chamber Set
Temperature
Auto On
On Auto
Man. Off
Off Man.
2 4 5
4 5 0
Figure 12
Humidity and Temperature Setting Switches
1. Put
the
AUTO/MAN
switches into the
MAN
position.
2. Put
the
ON/OFF
switches into the
ON
position.
3. Set
the
REMOTE COMMUNICATION
switch on the back of the instrument
to the
OFF
position.
Содержание OptiCal
