18
19
Chronograph
• The minute counter measures 30 minutes per rotation.
• The center stop-second measures 60 seconds per rotation.
PLEASE NOTE:
Before using the chronograph functions, please ensure that:
- The crown is in position I (= normal position)
- The two chronograph hands are precisely at zero position following activation
of pusher B. Should this not be the case, the positions of the hands must be
adjusted. (See chapter entitled “Adjusting the chronograph hands to zero”).
Chronograph: Basic Function
(Start/ Stop/ Reset)
1. Press pusher A to start the center stop-second hand.
2. To stop the timing, press pusher A again.
3. To reset the 3 chronograph hands to zero positioning, press pusher B.
I
II III
Crown
(Position I, II, III)
Pusher A
Pusher B
Center Stop-second
5040 .D:
30 Minute Counter
5050 .B:
30 Minute Counter
and Hour Counter
Seconds Counter
1/10 Seconds Counter
CHRONOGRAPH MODELS
(RONDA 5030 .D, 5040 .D, 5050 .B)
Setting the Time
1. Pull crown out to position III (the watch stops).
2. Turn crown until you reach correct time.
3. Push crown back into position I.
Setting the Date
1. Pull crown out to position II (the watch continues to run).
2. Turn crown until yesterday’s date appears.
3. Pull crown out to position III (the watch stops).
4. Turn crown until the correct date appears.
*NOTE:
When the correct date first appears, your watch is set at midnight.
5. Continue to turn crown until the correct time appears.
6. Push crown back into position I.
I
II III
I
II III
Minute Hand
Crown
(Position I, II, III)
Pusher A
Pusher B
Hour
Hand
Second
Hand
Date Indicator
Date Indicator
5040 .D
5050 .B
