Michaelis Maschinenbau KM 20 T, Инструкция по эксплуатации/Перечень запасных частей

Страница: 8 / 50

- 8 -
MICHAELIS
m a s c h i n e n b a u
7. Operation
During operation the machine has to be driven solely in floating position for better adaption to
ground unevenness and in order to avoid damage to the machine itself and to prevent high
brush wear. An additional contact pressure has to be absolutely avoided.
The depth wheel has to been adapted according to the brush position.
The adaption of the machine has to take place through the implement triangle or the three-
point hitch. The hydraulic hoses have to be firmly mounted. The clearance of all movable
parts has to be ensured.
7.1 KM 20 T / TS - Function mini-control panel with hydraulic cylinder
The control desk has 2 functions. On the one hand the telescoping of the main frame
with brush (2S1, left-right) and the other hands tilting the brush head (2S2: up-down).
All functions are applicable during the brush is working.
7.2
KM 20 TO / TSO - Function mini-control panel with top link
With the control panel you have the option by tilting back of the toggle switch
the function of the brush to choose operating or side adjustment.
Both functions are activated with the control valve of the carrier vehicle.
.
-2S1:
telescoping
-2S2:
tilting the
Brush head
Picture 4
Mini control panel with hydraulic cylinder
toggle switch left setting: retract / extend side adjustment
toggle switch setting right: Brush operation
Picture 5
Mini control panel with top link