Copyright © 2009
-
2014 Micca. All rights reserved.
Page | 35
8.6
Firmware Updates
To update the firmware, follow these steps:
1)
Download the firmware ZIP file and extract the “install.img” file onto the root directory (i.e.
not in any folders) of a USB drive.
2)
Plug the USB drive into an empty USB HOST jack on the player.
3)
With the player turned off and power cable disconnected, use a paper clip or toothpick to
press and hold the small pinhole firmware update button on the back of the player.
4)
While pressing the recovery button, connect the power cable to the player. Continue to
hold the firmware update button for 5 more seconds, and then release it.
5)
The recovery mode will begin upgrading the firmware from the USB drive:
6)
Wait for the player to complete the firmware update. Please be patient as it may take
several minutes to complete, during which the screen may be blank or show “no signal”.
Do not interrupt the process or power off the player.
7)
When finished, the player will show the home screen.
