Fully connected Quick Mount
Attaching the RedEdge-MX and DLS 2 to the Matrice
Once assembled, the Quick Mount can quickly and easily be installed or removed from the
Matrice. Power is provided by the Matrice via the Quick Mount.
1. Attach the assembled Quick Mount (with connected RedEdge-MX) to the Matrice using
the DJI lock mechanism on the Matrice.
2. Plug the DLS 2 cable from the DLS 2 port to the connector board.
3. Using the provided shorter 6-pin cable, connect the RedEdge-MX “DLS” port to the
connector board.
Diagram: RedEdge-MX to Connector Board to DLS 2
4. Secure the connector board using the double sided tape in a safe location.
5. Angle the camera so that, while flying forward, it will point nadir (straight down). The
forward-tilt angle can vary by aircraft, but it is typically 8º to 12º.
6. Use zip ties to secure any loose wires.
Rev 02 - July 2019
PAGE 6