Thank you for your purchase!
These instructions show how to integrate the MicaSense RedEdge-MX and/or Altum with a DJI
Matrice 100/600. It covers attaching mounting brackets included in the kit, powering the
camera from the host system, and placement of the Downwelling Light Sensor (DLS 2) unit.
Warning: This kit is not intended for any other RedEdge models other than the
RedEdge-M/MX and Altum. Damage will occur if any other RedEdge model is
connected.
What’s inside?
1.
Quick Mount Adapter (Qty 1)
2.
6 Pin Cable (Qty 1)
3.
Sensor Mounting Plate (Qty 1)
4.
Go-Pro Mount Adapter (Qty 1)
5.
M 3 X 0.5, 8 mm Screws (Qty 4)
6.
M 2 X 0.4, 6 mm Screws (Qty 2)
7.
M 2 X 0.4, 8 mm Screws (Qty 2)
8.
M 2.5 X 0.45, 4 mm Screws (Qty 2)
9.
Alcohol Wipe (Qty 1)
10.
Zip Ties (Qty 4)
11.
Double Sided Tape (Qty 5)
12.
DLS2 Mounting Disc (Qty 1)
13.
DLS2 Mast kit (Qty 1)
14.
Connector Board (Qty 1)
Images shown are not to scale
Rev 02 - July 2019
PAGE 2
