4
Note: Before drilling, make sure that there are no wires or other pipes located in the wall to prevent
damage.
OPERATION
Before First Use
NOTE:
It is normal when the heaters are turned on for the first time or when they are turned on after having
not been used for a long period of time the heaters may emit some smells and fumes. This will disappear
when the heater has been operating for a short while.
Location
•
Keep all combustible materials such as furniture, pillows, bedding, paper, clothes and curtains at least 3
feet away from heater.
•
Do not place anything on top of Heater.
•
Do not use in wet or moist locations; for example, bathrooms or laundry areas, or in areas where paint or
other flammable or volatile liquids are used or stored.
Power Function
1. Set the power switch to the OFF (0) position and insert the plug into a socket-outlet that is compatible with
the rating label on the product. Be sure that plug fits firmly.
2. Switch on the main power switch on the side and a beep will sound.
3. Press “POWER” to set functions. The display will light up.
Temperature
1. Room temperature is displayed every time the heater is turned on.
2. Press the temperature button the temperature display will start flashing. Use the(+) and (–) buttons to set
the desired temperature. The display will stop flashing when set. The temperature regulation range is
15°C-35°C.
3. The Heater will cycle between heating when the room temperature is either 2
o
C above or below the set
temperature.
