3
CONTROL PANEL
1.
DISPLAY
2.
TEMPERATURE
3.
TIMER
4.
- BUTTON
5.
POWER
6.
MODE
7.
+ BUTTON
BEFORE FIRST USE
•
Before first use remove any stickers or similar from the appliance. (Except the rating label! and Do NOT
COVER warning).
•
Dispose of any plastic bags responsibly as they pose a risk to young children of suffocation.
•
Wipe the outside of the appliance with a moist cloth and dry with a towel.
WARNING: Do not operate without feet attached or mounted on a wall. Operate the heater only in
upright position (feet on the bottom, controls on the top), any other position could create a hazardous
situation.
ASSEMBLY
Foot Assembly
1. The heater is packaged with the feet unattached. You must attach them before operating the heater.
2. Lay the heater on a flat table with the bottom of the heater overhanging the edge slightly.
3. Align the foot and castors with the holes provided on the base of the heater.
4. Fix the feet to the heater using the screws supplied.
5. Stand the heater on its feet on a stable flat surface.
Wall Assembly
Please note that the product must be installed at least 15 cm from the floor and 50 cm from the ceiling.
1. Make two holes (405 mm apart for 1500W heater), (515 mm apart for 2000W heater) with a diameter of 8
mm and depth of 40 mm
2. Insert the supplied anchors in the holes, and then use a screwdriver to tighten in screws supplied with
anchors, screws must protrude 6 mm from the anchor,
3. Finally hang the product on the hook holes provided on the back of the heater.
