Step 3
. Insert the inner duct cover into the outer duct cover
Step 4
. Fit the duct cover to the hood body (M4 Screws)
Step 5
. Attach the wall bracket to the wall
Step 6
. Hang the complete range hood on the wall bracket. Ensure
it is level.
Raise the outer duct cover and mark the position of the exit duct.
Remove the hood and complete the exit duct venting hole.
Step 7
. Re-install the hood. Ensure the hood is level and at the
desired height. Raise the outer duct cover, fit the exit duct
into place, lower the outer duct cover.
Cleaning
Always disconnect the Range Hood from the power supply when
cleaning.
Do not use harsh abrasives, solvents or scouring material as they
may damage the metal or plastics.
Warning!
Do not allow water to
enter the range hood.
Casing
Wipe the outer surface with a damp cloth and dry with a dry cloth.
Filters
Warning!
Do not wash the charcoal filters. Replace with authorised
replacements periodically. Replacement charcoal filters are sold in
stores.
Clean the outer filters once a week to maintain the efficiency of the
hood.
Remove the filters by pressing the release button. Wash in hot water
with a mild detergent and rinse clean.
Warning!
Allow to completely
dry before re-installing into the hood.
The stainless range hood has an internal plastic oil cup attached onto
the motor housing. This is clipped onto the motor housing by clicking
in the ends of the plastic oil cup onto the motor. From time to time the
internal plastic oil cup should be cleaned as there will be a build up
of oil into the plastic oil cup. To remove the internal plastic oil cup,
simply remove the baffle grill filters by pressing the release button.
Unclick the plastic oil cup from the motor housing by pulling off the
2 ends which are clicked onto the motor housing. Wash in hot water
with a mild detergent and rinse clean.
Warning!
Allow to completely
dry before re-installing back onto the motor housing. To re-install
simply click back the plastic oil cup onto the motor housing.
Re-insert the baffle grill filters.
3
4
Internal Plastic Oil Cup
Metal Screw
5x50
Expanding Tube
Hook
A
B
230
256
