19
•
To select the HIGH power option press the setting
button
Both blue
lights will light up to indicate ‘high power’.
•
LOW power is 1200W and HIGH power is 2000W.
Thermostat Function
•
Press the
select button ( ), the current
setting will flash then
it will return to display the current room temperature.
•
Press the setting
buttons,
or
to add 0.5°C or reduce 0.5°C be-
tween the range of 5°C to 36°C.
•
Once the desired
is set wait 5 seconds, the heater will exit the
function and return to normal operation. The current room
will be
displayed. To view the set
at any time, press the ( ) button.
Timer Function
•
To set the number of hours the heater will run before
switching off
press the timer select button (
) then press the setting
buttons
or
to add 0.5 hours or reduce 0.5 hours between the range of 0
-
18 hours).
•
Once the desired time is set wait 5 seconds, the heater will exit the timer function
and return to normal operation. To view the time set at any time, press the (
)
button.
Memory Function
•
When the heater is switched to STANDBY the last
will be
retained in the heater’s memory the next time the heater is switched ON, unless
the heater switched OFF using the power switch.
Note: The timer setting is not retained.
Remote
• The remote control duplicates all the controls that are on the control panel.
Please refer to the above
for operation.
