Installation/ Dismantlement
Installation
Dismantling
Attention
3V(2*AAA Battery)
+
Input 1:
1. Please check the cable, and make the circut is correct before power on.
2. When installation, pls handle with care to avoid the broken of the
glass panel.
Input 2:
AC90~120V
or AC180~240V
DC 3.3V
Power
Supply
-
MiBoxer specified power supply
need to be purchased separately.
Link/
Unlink
button
Unlinking Instructions
Linking Instructions
If the light not blink slowly, the linking failed, Pls switch off the light
again, and follow the above steps again.
When the light on, short
press " "
3 times
within 3 seconds
3
Click the 1-8 zones button you
want to link, the corresponding
indicating lamp will shine.
1
The light blink 3 times slowly
means the linking is done
successfully.
4
Switch off the light, after 10
seconds switch on again
2
Power
Power
Click the 1-8 zones button you
want to unlink, the corresponding
indicating lamp will shine.
1
Switch off the light, after
10 seconds switch on
again.
2
Power
Link/
Unlink
button
If the light not blink quickly, the unlink failed, pls switch off the light
again, and follow the above steps to unlink again.
When the light on, short
press " "
5 times
within 3 seconds
3
The light blinking 10 times
quickly, means the
unlinking successfully.
4
Power
Unlinking must be the same
zone with the Linking
Made in China
