Prodomus
10
before ironing fold down handle
removable anti-lime filter
S
S
c
c
o
o
p
p
e
e
o
o
f
f
d
d
e
e
l
l
i
i
v
v
e
e
r
r
y
y
•
Steam iron
•
Base station
•
Instruction manual
B
B
e
e
f
f
o
o
r
r
e
e
t
t
h
h
e
e
f
f
i
i
r
r
s
s
t
t
u
u
s
s
e
e
•
Remove all plastic bags, stickers and the protection film from the sole plate.
•
Clean the sole plate with a soft damp cloth.
•
Some parts of the iron have been slightly greased and as a result may smoke slightly for a short time
when switched on for the first time.
H
H
o
o
w
w
t
t
o
o
u
u
s
s
e
e
a
a
n
n
d
d
t
t
i
i
p
p
s
s
Filling with water
•
Fill water into the water tank always before plugging in.
•
Set the temperature control to „min“. Take the iron from the stand and remove the water tank by pushing
the release button completely. Pull out the water filter and pour water into the water tank with a suitable
filling cup. Fill about 1,5 litres. The water tank can be filled with about 2 litres of water (maximum level).
Then re-insert the anti-lime filter.
•
Now attach the water tank fittingly and ensure that it is engaged. When fixed,
the water level shall not be over maximum level.
Note:
For safety reason the iron shall not be placed on its base while filling ware.
Do not use chemically softened water or vinegar in the water tank. This might
damage the appliance. you can use distilled water when living in a region with very
calcareous water.
Anti-lime filter
In order to protect the appliance against lime residues, the base station is
equipped with a removable anti-lime filter inside the water tank. Due to the temper
in the household water, the manufacturer recommends to change the
anti-lime filter regularly. The anti-lime filter can be easily pulled out (see fig.).
As soon as the colour of the filter is turning to red colour and water is spurting out
of the filter, it has to be changed. Replacement filter you can get at the service point.
Ironing
•
Place the iron on the base.
•
Turn the temperature control to "min" position before plugging in.
•
The carrying handle is the ON/OFF switch. Please note that the carrying handle
must be folded down completely (see arrow to the right). If the carrying handle
still is fold up, the safety micro switch is deactivated and the iron will not heat up.
There is a release button on both sides of the handle. To fold up or down the
handle, push both release buttons at the same time.
•
In order to iron take the iron from the stand. Always replace the iron onto the
stand during ironing brakes.
•
Turn temperature control to the desired temperature. Always check first to see
whether a label with ironing instruction is attached to the article to be ironed.
synthetic fibres Acryl, Viscose, Polyamide, Polyester (low temperature)
silk, wool (medium temperature)
cotton, linen (high temperature)
(max)
•
The control lamp will light up from time to time and indicates that the iron is heating up again.
