Prodomus
11
Scope of delivery
•
hand unit
•
forming-(waving-) nozzle
•
curling iron
•
soft round brush
•
big curling brush
•
half round brush
•
straightener
•
instructions for use
How to use the hair styling set
Caution danger of burning! Always keep hot parts of the brush away from scalp and
skin. Avoid touching hot parts of the unit!
Note
The hair styling set is not a hairdryer and must only be used for finish styling.
•
Never use the appliance without the accessories. It is not suited for use without accessory.
•
Do not use with synthetic hair or wigs.
Preparing
•
Use the unit with dry or slightly humid hair, but never with complete wet hair.
•
Use a conditioner after having washed your hair. Rinse and dry the hair well and comb it
out before styling. All this will make the styling easier.
How to use
•
Comb the hair through before connecting the unit to the current and switching it on.
•
For styling, forming, curling do not wind too thick strands of hair around the styling
attachment. Wind a smaller strand of hair around the attachment.
•
Connect the appliance to the current. The control lamp is illuminated, the unit is operating.
•
Set the switch to "1".or "2“ for warm or hot air flow, depending on witch level the switch is set.
•
Move the brush outwards first then inwards curling the hair ends towards the head.
•
Let the warmness act on the hair for a few seconds only. Then unroll the curls.
•
Whith level “2” the exhausting air and attachment in contact with the hot air will get very
hot quickly. Use this level only short for faster styling to avoid that hair gets too hot.
•
With the “Cool Shot” function (press the button above the switch for temperature and fan
level) you can minimize the temperature during the treatment. When pressing and moving
the button to the front at the same time, the button can be locked to hold a lower
temperature. With lower temperature the hair is treated more gently and the treatment can
be prolonged.
•
Always allow your hair to cool down a bit before finishing the hairdo by combing the hair out.
Change of accessories
•
To remove an accessory, press the release button on the side of the appliance, turn the
attachment slightly counter- clockwise as fast as it will go and pull the accessory off the unit.
•
Attach the new attachment, press the release button and turn the attachment at the same
time clockwise till it is engaged. When it is not easily possible to pull the attachment off, it
is engaged correctly. Never use force to handle with the unit or attachments to avoid any
damage.
