15
Cleaning the Floor Attachment
1. Place the floor attachment in the direction
as shown in the figure (facing your
direction). Use a coin to turn the lock
counterclockwise by 90° to the unlocked
position.
Roller
latch
2. Turn the end cap to the open position.
Gently slide the roller away from the head.
End Cap
3. Separate the end cap from the roller and
remove any hair wrapped around the roller
and end cap.
Roller
End Cap
4. After cleaning, install the end cap back on
the roller.
5. After confirming that the end cap is
installed in place, put the roller back as
shown in the figure. Once the roller is
installed in place, turn the end cap to the
locked position.
6. Rotate the latch clockwise by 90° to the
locked position to secure the roller.
This version is for private use only and should not be distributed.
