19
20
Specifications
Vacuum-Mop
Charging Dock
Name
Robotic Vacuum Cleaner
Model
STYTJ05ZHMHW
Dimensions
353 × 350 × 98.8 mm
Battery
14.4 V /4800mAh
(
Rated Capacity
)
Charging Time
Approx. 6.5 hours
Net Weight
4.08 kg
Wireless Connectivity
Wi-Fi IEEE 802.11b/g/n 2.4 GHz
Compatible with
Android 4.4 & iOS 10.0 or above
Rated Voltage
14.4 V
Rated Power
46 W
Operation Frequency
2400–2483.5 MHz
Maximum Output Power
< 20 dBm
Model
CDZ2103
Dimensions
130 × 126 × 93 mm
Rated Input
100–240 V ~ 50/60 Hz 0.5 A
Rated Output
19.8 V 1 A
WEEE Disposal and Recycling Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed
with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a
designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities.
Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the
installer or local authorities for more information about the location as well as terms an conditions of such collection points.
Under normal use of condition, this equipment should be kept a
separation distance of at least 20 cm between the antenna and the body
of the user.
Issue
Possible Cause and Solution
Why doesn't the vacuum-mop carry out the
scheduled cleanup?
Check whether the battery level is sufficient. The vacuum-mop needs to have a battery level of 15%
or more to start a scheduled cleanup.
What should I do when no water or very little
water comes out when mopping the floor?
Please check whether the water compartment is filled and the mop is properly installed. Please
clean the mop on a regular basis.
What should I do when too much water comes
out of the mopping assembly?
Make sure the water tank lid is securely closed.
Why doesn't the vacuum-mop resume cleaning
after charging?
The vacuum-mop does not resume cleaning in do not disturb (DND) mode, or after manually being
returned to the dock to charge.
Why doesn't the vacuum-mop return to the
charging dock after being moved?
Moving the vacuum-mop may cause it to re-position itself or re-map its surroundings. If the vacuum-
mop is too far from the charging dock, it might not be able to automatically return on its own, in
which case you need to manually place the vacuum-mop onto the charging dock.
