Mi-T-M
Undercarriage Wash System Operator's Manual
11
ELECTRICAL CONNECTIONS:
1. A qualified electrician must install the electrical system.
a. Verify electrical supply at power source is off.
b. Run water tight conduit:
i. From selector switch remote box to the undercarriage main control
panel.
ii. From local disconnect to undercarriage main control panel.
c. Using correct wire sizes, connect wiring below (See wiring diagram):
i. From selector switch remote box to main control panel (16GA
minimum).
ii. From main power from local disconnect to undercarriage main control
panel (See amp requirements in specifications section to determine
wire size.)
d. Connect float from holding tank into undercarriage main control panel
(See wiring diagram).
WARNING RISK OF
ELECTROCUTION!
ENSURE ALL
CONNECTIONS ARE
DRY AND THE POWER
SUPPLY IS OFF.
INSTALLATION
