background image

 

- 1 - 

PROFESSIONAL WEATHER STATION   

 

(WIND AND AIR PRESSURE) 

 

   

Operation Manual 

 

 
About this manual 

Thank you and congratulations on selecting this professional weather station! We are positive 
you will enjoy the benefits of accurate weather readings and the precise radio controlled time 
information that our instruments offer. 
This manual will guide you step-by-step through setting up your device. Use this manual to 
become familiar with your professional weather station, and save it for future reference. 

 

Glossary of Common Terms 

 

 
LCD 

 

“LCD” is an acronym for ”Liquid Crystal Display”.    This is a common type of display screen used 
in televisions, computers, watches, and digital clocks.   
   

BAROMETER & BAROMETRIC PRESSURE 

 

A barometer is a device that measures the pressure of the air pushing on it—this measurement is 
called the barometric pressure.    We don’t actually feel the barometric pressure because the air 
pressure is pushing equally in every direction.   
   

RELATIVE AIR PRESSURE 

 

Relative air pressure is the same as the barometric pressure.    The calculation of relative air 
pressure is a combination of the absolute air pressure and the altitude.   
   

ABSOLUTE AIR PRESSURE 

 

Absolute air pressure is the actual air pressure on the barometer without regard to altitude.   
   

INCHES OF MERCURY 

(inHg)

 

 

Inches of Mercury is the common unit of measurement for air pressure in the United States.   
   

HECTOPASCALS 

(hPa)

 

 

Hectopascals are the common units of measurement for air pressure in the International System 
(SI) of measurement.    The hectopascal holds the same value   

 

Important Note: 

Before inserting batteries, please carefully read the operation manual. 

 

The Professional weather station includes a base station (receiver), a transmitter unit, one wind 
direction sensor, one wind speed sensor, one rain gauge, USB cable and a PC software package 
on CD-ROM. 
 

An added feature of the Weather Station is the readout of all measured and displayed time 
and weather data on a PC.     

 
 
 
 
 
 

Содержание WH2081

























Отзывы: