11
c h a r g I n g u p & p l u g g I n g I n
To charge the CUTLESS Preamp, plug the Mi-Si
Power Charger into a 120/220 V AC outlet. Then
plug in the Power Charger 1/4” stereo plug into
the preamp’s endpin jack and wait 120 seconds.
Now you’re ready for 4 hours of performance
time (actual playing time may vary depending on
playing style).
You can plug your instrument into ANY input
of ANY system or amplifier regardless of input
impedance. In the same manner, you can use
ANY type of shielded MONO cable - regardless of
its capacitance. Your sound will not be altered.
You can enjoy the benefits of an active amplified
system without worrying about batteries.
9V
+
-
Ground
Ring
The CUTLESS Preamp & Endpin Jack can be permanently mounted as shown.
Bypass Switch:
The CUTLESS Preamp features a Bypass
Switch. If you forget or lose your Remote, and would like
to bypass your “remembered” EQ settings, simply flip the
Bypass Switch located on the back of the preamp.
Important:
Be sure to flip the Bypass Switch back to its
original position before using your Remote again.
10
p r e a m p I n s t a l l a t I o n
Guitar Body
Tip:
Using the Power Charger to power up your
Preamp is truly remarkable. But what if you forgot
or lost your Power Charger? Don’t worry! Although
we don’t promote the use of batteries, in this case
all you need to power up your system is any stereo
cord and a common 9V battery.
Plug the stereo cord into your instrument. Hold the
9V battery so that the positive terminal is touching
the Ring of the stereo plug and the negative
terminal is touching the Ground. Hold it for 60
seconds and you are ready to play for 2 hours.
The system will not be damaged by accidentally
connecting the battery in wrong direction.
