9
•
The appliance is intended exclusively for household or similar use. It must not be used for
commercial purposes!
•
The appliance must never be used after a malfunction, or if the appliance has been dropped
into water or damaged in any other way.
•
The manufacturer accepts no responsibility whatsoever for incorrect use resulting from failure
to observe the instructions for use.
•
Technical changes and errors excepted!
Commissioning
:
•
Open the Velcro fastener of the carrying strap
•
Unroll the heating mat completely
•
Lay out the heating mat with the PVC side facing up and the fabric/nap side facing down.
•
Plug the Euro mains plug into a suitable socket.
•
The power LED and the display light up once briefly.
•
The heating mat is now ready for operation
Usage:
CAUTION: Do not place heavy furniture or objects on the heating mat. Also, do not place point loads
such as table legs or the like on the heating mat.
Switch on:
The heating mat is switched on by pressing the power button once, the power LED lights up if the mat is
switched on. After switching on, the display shows the timer time, the set temperature set with the rotary
control and the actual temperature. After that, the actual temperature of the heating mat is permanently
shown in the display.
Set heating temperature:
The desired temperature (setpoint temperature) can be set using the rotary control. The temperature (10 -
60°C) is shown in the display while turning. If the measured temperature of the heating mat is below the
set temperature, the mat is heated and the heat LED lights up. If the temperature of the heating mat
corresponds to the set temperature, the mat is not heated and the heat LED goes out.
