18. Black-box configuration (1)
◆
Black Box configuration: when users press button in the viewer main screen, it show configuration
window like below. It is separated with time, screen, voice/image and user setting tap.
1.
Play path shows the date and time of the station.
2.
Select the button on the Viewer Main screen. select the drive
on Connected to a memory card.
3.
If you select the Preferences tab, constant mode impulse, the impulse
parking mode, blocking voltage, and parking mode, you can set the
usage of the SD..
4.
Driving impulse setup : Set up a degree of impact by which an event
recording is activated. Select either ‘Fast setup’ or ‘Manual setup’. Fast
setup is sensitive, normal, in sensitive of the three stages can be
selected.
Manual setup is Front and rear, left and right, up and down of the step
is larger value is more insensible. The smaller value is more sensitive.
(select : 1 step~10 step)
5.
Set the amount of parking mode shock. : Front and rear, left and right,
up and down of the step is larger value is more insensible. The smaller
value is more sensitive. (select : 1 step~10 step)
6.
Blocking voltage setup : Blocking voltage setup is reference voltage
setup and separated by a timer set. The reference voltage setup is
[11.5V], [11.7V], [11.9V], [12.1V] to available as a choice to step 4.
timer is 6 hours, 12 hours, 24 hours, 48 hours can be selected in four
steps. Total select one of eight steps are.
7.
Parking mode set to SD card usage : You can set how much memory
of the SD Card is allocated for recording in the parking mode. Select
between 25% and 50%.
8.
When you click the Save button after you select this, the environment
setting is finished.
[ Configuration ]
27
