Button
Operation
Status
LED display
Alarm
Power switch
ON
Supply power
-
-
OFF
Power OFF
-
-
-
Apply power
After booting,
The
RED
and
BLUE
LEDs blink with the interval
of 1 second
Beep~ long
GPS Operation
Blink the
GREEN
and
BLUE
LEDs
REC button
Push for 1 second
Start emergency (forced) recording
The
RED
LED quickly blinks
Short 2 beep when it start a
recording
Short 1 beep when it finish a
recording
Push for 3 seconds
Voice recording on/off
(Mute Off/On)
Regular recording mode:
RED
LED blinks with
the interval of 3 second
(But,
GREEN
LED will blinks every 3 seconds
when GPS is connected)
Parking mode:
BLUE
LED blinks with the
interval of 3 second
Short 2 beep
Press long
(Longer than 10
seconds)
Format the micro SD card
Blink the
GREEN
LED brinks
and operate again when the format is
completed
Start format: Beep~ long
End format: Beep~ long
-
Update
Update using the micro SD card
The
RED
and
GREEN
LEDs alternatively blink
and operate after rebooting when the update is
over
The beep sounds long in the
beginning and shortly beeps
in the end
-
GPS input
GPS Operation
the
GREEN
blinks
-
-
Parking monitoring
mode
Recording 20sec. By Front/Rear motion and
check detection(before and after the
detection: 10sec. each)
Monitoring:
BLUE
LED blinks with the interval
of 1 second
Recording:
BLUE
LED quickly blinks
-
Pulling off the power
terminal
Store the last video using the backup
battery
and turn off the set power.
Turn off all the LEDs
-
7. Operation and Buttons on the Product_(2)
12
