25
PowerView® I
LED Motor Indicator Light
The motor indicator light shows the motor's status. The light can shine RED or
GREEN. Here is an overview of the possible combinations.
LED flashes
after switch-on
Start / Restart
Unit type: Venetian blind, 16 mm
Unit type: Venetian blind, 25 mm and 35 mm
LED flashes
after reset
Reset end positions (factory settings)
Reset network via Motor button
Unit type: Venetian blind 16 mm.
Reset network via Motor button
Unit type: Venetian blind 25 mm and 35 mm
LEDs flash during battery-
powered operation
Low battery level. The unit will run slowly
and can be moved up only.
Other flashing signals
Extremely low battery level.
The unit will not run any more.
Maximum motor voltage has been reached (obstruction)
The motor is in programming mode
Movement sequences
One short movement
(1 × up, 1 x down)
Action confirmed
Two short movements –
action refused
No end positions set
Bottom end position invalid
Top end position invalid
Three short movements
Action refused when setting the top end position
Four short movements
Action refused during end position setting
EN
