22
Set end positions (set top/bottom end position)
Top end position
Bottom end position
Press
Stop button
for 6 seconds.
Button lighting on the transmitter flashes.
Teach-in readiness established.
Do not select a channel button on the remote control unit.
Press Motor button and keep pressed.
1
Additionally
, within 3
seconds,
briefly press
Open button
.
2
Additionally
, within 3
seconds,
briefly press
Close button
.
Blind briefly moves up and down once.
Release
Motor button
.
If the buttons are still flashing, the remote controlunit is still in
‘Teach-in Readiness’ mode: Press
Stop button
for 6 seconds or
wait for 20 seconds.
Button lighting on the transmitter stops flashing.
Teach-in readiness ended.
The desired top/bottom end position has now been set.
To set again, repeat steps.
PowerView® I
Venetian blinds Programming Guide
1
2
