MHV Quadcopter, Руководство по ремонту

Страница: 13 / 37

V 3.1 MHV Quadcopter Workshop Page 12 of 36
4 - eePe EEPROMN editor
Then go
Burn -> Write Memory to TX
.
Wait for the program to complete and confirm that there were no errors during the flashing process.
After flashing, remove the programmer and confirm that the new firmware is working correctly (you
may get a few errors the first time you start it up, this is normal).
Transmitter setup
Note this section is simply a reference for manually changing the settings of the Transmitter to
match the contents of the 9XR settings file in the previous section. If you have already uploaded
the settings, you can skip this section.
Turn on the transmitter.
To go the global settings menu, press the LEFT button
Use UP/DOWN to cycle through the settings and LEFT/RIGHT to change the selected setting.
The settings that need to be changed:

Owner Name = <your name>

Beeper = NoKey

Battery Warning = 9.9 V

Splash Screen = OFF

Splash Name = OFF

Throttle Warning = OFF

Switch Warning = OFF

Mode = 1
Go to the calibration page:
And calibrate the sticks.
Press exit to get back to the main screen.