Mod. IC
Version 01
Page 3-34
1.
GENERAL
Dear customer,
This operation and maintenance manual makes it easy for you to get to know the Slicing
and Portioning machine IC 610/21 and how to use it properly. This manual contains
important information and instructions which help make it possible to operate the Slicing
and Portioning machine safely, correctly, and economically. Your attention and
consideration of the material contained in this manual will help to reduce potential danger,
repairs and out of operation time as well as extending the dependability and life-
expectancy of the machine.
It is necessary to comply with all safety requirements before bringing the machine into
operation.
The general safety and accident prevention regulations as well as those from local trade
and professional associations must be abided by at all times. All safety instructions from
this manual are to be observed. Only qualified and trained personnel are allowed to
operate the Slicing and Portioning machine. The machine may only be used according to
regulations.
We can no longer uphold our guarantee obligations as specified in the terms of delivery in
the case when maintenance work is negligibly or improperly executed. Only original MHS
spare parts guarantee quality and exchangeability. We draw your attention to the fact that
we assume no liability for damage or operational disturbances resulting from failure to
comply with the guidelines and instructions set out in this Operation and Maintenance
Manual.
The recognised technical regulations for safe and correct work procedures must be
complied with in addition to the accident prevention regulations expressed in this manual,
those regulations valid in the country where the machine is to be used and to those
regulations mandatory at the workplace.
Should you have any questions which are not sufficient answered by this manual, please
turn to our customer service.
MHS Schneidetechnik GmbH
Seestrasse 7
D-74232 Abstatt
Telefon:
(0 70 62) 91 08 - 40
Telefax:
(0 70 62) 91 08 – 42
E-Mail:
Internet:
www.mhs-schneidtechnik.com
