4 | www.mhpgrills.com
ATTACH THE BASE TO THE COLUMN (OC BASE)
STEP 2A-OC
PARTS NEEDED FROM OC BOX
OC
CAST ALUMINUM BASE
GGAXL
AXLE
GGGC
AXLE CLIPS (2)
GGWL1
6" WHEELS (2)
OCOL
HUB CAPS (2)
ASPCL1
12' NATURAL
GAS HOSE
(Quick Disconnect
)
HARDWARE NEEDED
GGM4
KEP NUTS
(QTY. 6)
GGM15
RECTANGULAR WASHERS
(QTY. 4)
GGM6
1/4 X 20" X 3/4"
HEX BOLTS (QTY. 6)
GGM11
STAINLESS STEEL
WASHERS (QTY. 10)
TOOLS NEEDED
ADJUSTABLE
WRENCH
7/16" OPEN
END WRENCH
ATTACH WHEELS
•
For accessibility, lay the column on it's side.
•
Attach the wheels by slipping the axle
through the pre-drilled holes in the
base, slide the wheels onto the axle
and secure with the axle clips.
•
Finish by snapping the hub caps on
before standing the unit upright.
AXLE CLIP
AXLE
AXLE
AXLE CLIP
HUBCAP
HUBCAP
Included with natural
gas bases only
SCAN THE
QR CODE FOR
ASSEMBLY VIDEO
Attach the Column to the Base
•
Attaching the column to the base will
be easier to handle by laying the column face
down and matching the holes on
the column lip to the holes on the base.
•
On the left and right sides of the column—
Locate the two pre-drilled holes on either side
of the column lip. Slide a 1/4 x 20" x 3/4" Hex
bolt down through a rectangular washer to
underside of the base through the
pre-drilled hole on the column and secure
using a Kep Nut.
•
On the front side of the column—
Locate the two pre-drilled holes on the
front side of the column lip. Slide a
1/4 x 20" x 3/4" Hex bolt down through
a round washer to underside of the base
through the pre-drilled hole on the column
and secure using a Kep Nut.
•
Use a 7/16" wrench to hold the Kep Nut
while using a second adjustable wrench
to tighten the bolt. There are a total
of six pre-drilled holes which should
be secured.
IMPORTANT: The large rectangular washers are used on
the top of the pedestal column lip. The round washers and
Kep Nuts are used under the base. Tighten securely and
stand unit upright.
HEX BOLT
HEX BOLT
RECTANGULAR
WASHER
ROUND WASHER
HEX BOLT
ROUND
WASHER