www.mhpgrills.com
| 3
Locate the Tank Lock Bar from the OCOLB Box
•
Align the holes on the bar to the pre-drilled holes on the column.
•
Use the 1/4 x 20" x 3/4" Hex Bolt, Nylon Lock Bar Spacer, and a
Kep Nut on each side to fasten the Tank Lock Bar in place. This
spreads and holds the correct spacing at the back of the column.
•
Use 7/16" open end wrench to hold the Kep Nut while using
the second open end wrench to tighthen the Bolt.
After connecting the tank lock bar you will then attach the base, the grill head and the gas line.
FOLLOW THE STEPS FOR YOUR SPECIFIC BASE.
HEX BOLT
NYLON LOCK BAR SPACER
PRE-DRILLED HOLES
KEP NUT
OP BASE
Step 2C-OP
Page 7-8
Step 3
Page 9
Step 4C-OP
Page 12-13
Step 5
Page 14
OM BASE
Step 2B-OM
Page 5-6
Step 3
Page 9
Step 4B-OM
Page 11
Step 5
Page 14
OC BASE
Step 2A-OC
Page 4
Step 3
Page 9
Step 4A-OC
Page 10
Step 5
Page 14
CONNECTING THE TANK LOCK BAR
STEP 1
PARTS NEEDED
TOOLS NEEDED
GGOTB
TANK LOCK BAR
GGOCOLRB
STAINLESS STEEL
COLUMN
HARDWARE NEEDED
GGM6
1/4 X 20" X 3/4"
HEX BOLTS (2)
GGM4
KEP NUTS (2)
7/16" OPEN END
GGOTBS
NYLON TANK
BAR SPACERS