manualshive.com logo in svg

MHM SYNCHROPRINT 3000, Руководство по эксплуатации

Поделиться
Скачать
MHM SYNCHROPRINT 3000 Скачать руководство пользователя страница 14

 

 

 

Operating Instructions - Synchroprint 3000 (Manual-Registration Version) 

________________________________________________________________________________ 
Operating Instructions - Synchrprint 3000 (Manual-Registration Version) V1-1 

Page 14 of 49 

 

 

4.

 

Assembly 

This section describes the external supply/connection ports of the Synchroprint 3000 and the points 
to be observed during assembly. 
 

4.1.

 

General Assembly Instructions 

 

 
(The  customer  should  have  a  minimum  of  two  persons  available  to  assist  the  technician  with  the 
installation and assembly of the machine).  
 

4.2.

 

Positioning of the Synchroprint 3000 

In  order  to  ensure  safe  and  correct  assembly  and  smooth  operation  of  the  Synchroprint  3000,  a 

minimum  distance  of  1metre 

should  be  maintained  between  the  Synchroprint  3000  and  any 

adjacent structures (walls, columns, etc.) and/or other machinery. The dimensions of each particular 
model are listed in section 

“2. Technical Data”.

 

 

4.3.

 

Ambient Conditions    

For  the  electrical  equipment  on  the  Synchroprint  3000,  ambient  conditions  according  to  standard 
IEC 60204 “Electrical Equipment of Industrial Machines” should be observed. 
 
The following points should be observed in order to achieve efficient running and an optimum level 
of production with the Synchroprint 3000: 
 

1.

 

The premises, where the Synchroprint is  to  be  operated, must be kept  clean, dry  and well-
aired. 

2.

 

The ambient temperature must not fall below +5° C or 45° C. 

3.

 

Relative air humidity must not exceed 80 %. 

4.

 

The  mains  supply  must  not  exceed  or  fall  below  a  tolerance  of  +/-  5  %  of  the  required 
voltage  for  the  Synchroprint  3000.  If  this  voltage  stability  cannot  be  guaranteed,  the 
customer must install a constant-voltage regulator to protect the Synchroprint 3000 against 
such fluctuations. 

5.

 

The compressed air must be clean, filtered and dry. 

6.

 

Compressed air supply must be sufficient in terms of pressure, volume and consistency. 

7.

 

Electricity supply should be sufficient with adequate fuse protection. 

 

The  Synchroprint  3000  must  only  be  installed/assembled  by  an  authorized 
MHM  service  technician,  or  by  an  authorized  service  technician  from  an 
official  MHM  dealer/agent.  Any  assembly/installation  by  any  third  party  not 
listed above will result in immediate cancellation of the warranty. 

Содержание SYNCHROPRINT 3000


















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды