12
TROUBLESHOOTING
Check if the cuff is
properly connected.
Replace the air tube
if it is broken.
Fail to inflate
“Err P” displayed
“Err 1” displayed
“Err 2” displayed
“Err 3” displayed
Incorrect results
Measure again.
Remove interfering
source e.g. mobile
phones, magnets.
Do not move during
measurement
Return for servicing.
Deflate too rapidly
Movement during
measurement
Signal interference
Problem Cause Solution
No display when
you press the
Power/Start
button
Have the batteries
run out?
Are the battery
polarities wrong?
Replace new
batteries.
Re-align batteries
in correct polarities.
Note:
If your problem cannot be solved by the solutions above,
contact Customer Service at (877) 358-4342 (Mon–Fri,
9am–5pm, EST) . Do not disassemble the unit.
