MH RYZ 50 Cross C, Руководство по обслуживанию

Страница: 77 / 92

RYZ
ELECTRICAL SYSTEM 6-9
SLEEP MODE
Every time the key switch is turned to the OFF position,
the following operations take place:
The screen and its lighting are switched off.
All the indicator lights that were on are turned off.
Entry into “sleep” phase, characterised by a low current con-
sumption, in which the system interrupts every activity.
CONFIGURATION
The confi guration menu can only be accessed with the machine
halted.
Holding the mode button down for approximately 5 seconds acce-
sses the TOD function, and the confi guration menu is displayed.
This menu allows the user to alter the following parameters:
the circumference of the wheel (minimum 1,000 mm, maxi-
mum 2,500 mm).
Unit of measurement (Km/h or Mph).
Number of pulses coming from the speed sensor for each turn
of the wheel (minimum 1, maximum 12).
Number of pulses for each engine revolution (minimum 1,
maximum 6).
To ensure that the alterations made in the confi guration menu are
consolidated, the user needs to run through the entire sequence of
screens envisaged in this menu, making sure to exit the confi gura-
tion menu (and re-establishing the standard operating mode). To
re-establish the standard operating mode, keep the mode button
held down in the last screen, regarding the number of pulses per
engine revolution (which is the last menu confi guration screen),
until the apparatus returns to the standard operating mode.
If the confi guration menu is exited by:
putting the machine in motion,
turning the ignition key,
or not holding the button down for 20 seconds, the alterations
made will not be registered and the system will return to the
preceding values.
1)
2)
3)
1)
2)
3)
4)
1)
2)
3)
6
CAUTION:
The system will only permanently save the changes made
when the confi guration procedure is carried out correct-
ly.