background image

•  Do not smoke during use. Nicotine reduces the blood supply to the hands and fingers, 

increasing the risk of vibration-related injury.

•  Use tools with the lowest vibration when there is a choice.

•  Include vibration-free periods each day of work.

•  Grip tool as lightly as possible (while still keeping safe control of it). Let the tool do the 

work.

•  To reduce vibration, maintain the tool as explained in this manual. If any abnormal 

vibration occurs, stop use immediately.

ALWAYS FOLLOW THE SAFETY RULES FOR USE OF THIS PRODUCT. 

You can

get seriously hurt by using this tool unsafely or incorrectly.

•  Always use caution, particularly if operating the power tool around electrical wiring. 

Your tool has insulated gripping surfaces - be sure to hold the power tool by these 

surfaces to avoid electrical shock if the cutting part of the tool should make contact with 

a "live" wire.

•  Only operate the tool when you are securely holding it with both hands; 

do not leave 

the tool running.

•  Don't use water on your work surface - 

this tool is not waterproofed.

•  Always ventilate your working area adequately.

•  Make sure to use appropriate respiratory protection. 

Use of this tool on some paints, 

wood and particular products may produce dust containing hazardous substances

  WARNING: Do not allow the terminals of the battery to contact metal objects when 

carrying or storing the battery.

If the battery terminals come in contact with conductive materials, it can cause fires - so 
use caution when transporting the battery. NOTE: the US Department of Transportation 
Hazardous Material Regulations (HMR) prohibit transporting batteries in commerce or on 
airplanes (i.e. packed in suitcases and carryon luggage) UNLESS they are properly 
protected from short circuits. Take special precaution when transporting individual 
batteries to make sure the terminals are well insulated and protected from anything that 
could contact them and cause a short circuit.

SYMBOLS

For your easy reference, here are the tools symbols you may see on your tool label:

12

13

STAY ALERT

Watch what you are doing and use common sense. Don't operate any tool when you are 

tired.

  

WARNING: Some dust created when using power tools to sand, grind, drill or saw 

and/or other construction activities contains chemicals known to the State of California 

to cause cancer, birth defects or other reproductive harm. Some examples of these types 

of chemicals:

• lead from lead-based paint
• Crystalline silica from bricks and cement and other masonry products
• Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies depending on how often you do work that involves 
these materials.
To reduce exposure risk, work in a well ventilated area with approved safety equipment like 
dust masks that are designed to filter out microscopic particles.

• 

Avoid prolonged contact with dust from construction activities like power sanding, 

sawing, grinding, and drilling. Always wear protective clothing and immediately wash 

any exposed areas with soap and water.

If you allow dust to get into your eyes or mouth, or stay on your skin, you risk absorption of 
these harmful chemicals.

   WARNING: Dust from use of this tool on construction material may cause serious 

and/or permanent respiratory (or other) injury. 

Direct the particles away from your face, 

and be sure to use NIOSH/OSHA approved respiratory protection against dust exposure.

Vibration Safety

This tool vibrates during use. Repeated or long-term exposure to vibration may cause 
temporary or permanent physical injury, particularly to the hands, arms and shoulders. To 
reduce the risk of vibration-related injury:

•  Anyone using vibrating tools regularly or for an extended period should first be examined 

by a doctor and then have regular medical check-ups to ensure medical problems are not 

being caused or worsened from use. Pregnant women or people who have impaired 

blood circulation to the hand, past hand injuries, nervous system disorders, diabetes, or 

Raynaud’s Disease should not use this tool. If you feel any symptoms related to vibration 

(such as tingling, numbness, and white or blue fingers), seek medical advice as soon as 

possible.

20V ULTRA Oscillating Multi-Tool 2Ah KIT 

(MH-03-OT-B1-0-1)

20V ULTRA Oscillating Multi-Tool 2Ah KIT 

(MH-03-OT-B1-0-1)

Содержание MH-03-OT-B1-0-1





















Отзывы: