04
•
ALWAYS be sure that all other persons are at a safe distance from the rammer. Stop the machine if people step into the working area of the
machine.
•
ALWAYS guide the rammer in such a way that the operator is not squeezed between the rammer and solid objects. Special care is required
when working on uneven ground or when compacting coarse material. Make sure to stand firmly when operating the machine under such
conditions.
•
NEVER leave a running machine unattended.
•
ALWAYS operate the rammer in such a way that there is no danger of it turning over or falling in, when working near the edges of breaks,
pits, slopes, trenches and platforms.
•
NEVER run machine indoors or in an enclosed area such as a deep trench unless adequate ventilation is provided. Exhaust gas from the
engine contains poisonous carbon monoxide gas, exposure to carbon monoxide can cause loss of consciousness and may lead to death.
•
NEVER ingest fuel or inhale your vapors, and avoid contact with the skin. In case of contact with skin, wash affected surface immediately. If
the fuel comes into contact with the operator's eyes, wash immediately with water and seek medical attention as soon as possible.
•
ALWAYS wear protective clothing when operating rammer. Wear goggles or safety glasses, hearing protection, and safety shoes.
•
ALWAYS keep hands, feet, and loose clothing away from moving parts of rammer.
•
ALWAYS use mask during compaction operations, fuel tank replenishment and cleaning.
•
Before starting compaction of trenches, ensure that the walls will not collapse due to vibration.
•
Check that the area to be compacted does not contain live electrical lines or gas, water or communication services that may suffer damage
due to vibration.
•
NEVER touch hot muffler, engine cylinders, or cooling fins. Burns will result.
•
Before performing any operation or maintenance, wait for the engine to cool.
•
DO NOT refuel the engine when it is hot or running.
•
DO NOT refuel near a confined area, areas with sparks, flames, smoke or any restricted area.
•
DO NOT spill fuel when filling the engine. Always clean up any fuel spills.
•
DO NOT smoke while operating rammer and/or when refueling engine.
•
DO NOT smoke near a confined area, areas with sparks, flames, smoke or any restricted area.
•
ALWAYS replace fuel tank cap after refueling.
• ALWAYS check fuel lines, fuel cap, and fuel tank for leaks and cracks before starting engine. Do not run machine if fuel leaks are present, or
fuel cap or fuel lines are loose.
• ALWAYS turn engine OFF when rammer is not being operated.
• NEVER use choke to stop engine.
To
order
go
to
Discount-Equipment.com
