MGL Avionics Stratomaster Ultra “L” Owner’s manual
Page 43
Sender setup menu
The sender setup menu allows you to choose temperature sender types for use by your
instrument. The Stratomaster Ultra allows you to use a variety of different temperature
senders for anything from oil or water temperature to CHT or EGT. It is important that you
inform the instrument which type of sender(s) you are using so the instrument knows how to
interpret the readings given by the sender(s). Incorrect sender type selections will result in
incorrect temperature readings.
Fuel tank/level sender setup
This menu item allows you to calibrate a fuel level sender. You would normally only do this
once, a procedure that will take you 10 to 30 minutes depending of your aircraft. After
calibration the Stratomaster Ultra will be able to give you a tank level reading that has been
corrected for tank shape and volume. You can then enjoy a tank level reading that accurately
reflects your fuel level in liters or gallons (choose the latter in the “mode setup menu”).
Technical items
This menu item may show if it has been enabled (Press + and – and hold these keys down
when you switch the unit on).
The items available under this menu may change between releases of the firmware and are
not normally used by the user of this instrument. They are functions that are used in the
factory for testing and calibration of your unit.
Please do not alter any of the settings as this
may affect the accuracy of your instrument
.