background image

1.0 Registration

It is most important you register your MGI Buggy online 
immediately as registration:

• 

Records your buggy for warranty purposes

• 

Speeds up any servicing required on your buggy

• 

Assist us to contact you with any updates to your buggy

To register your buggy, visit 

www.mgigolf.com

You will need to record your MGI serial number. This is found under 
the battery tray.

Please keep this user manual on file for your own reference  
and a copy of your serial number;

My MGI Buggy Serial Number is

  

[example ACQV01234567890 ]

Purchased Date

 /  / 

You may be required to show proof of purchase so we 
recommend you keep your receipt with this manual.

2.0 What’s Included

• 

MGI Quad Buggy

• 

Battery

• 

Battery Bag and Lead [SLA batteries Only]

• 

Battery Charger

• 

Padded Seat with Bracket

• 

Sand Bucket Loop

• 

Umbrella Holder

• 

Lower Bag Strap

• 

Spare Parts

 

– Speed Button x 1 

 

– 40A Fuse Connector x 1 [see battery care section]

 

– 4mm  Allen Key [for aligning front wheel as required]

 

– 4 x Rubber Gaskets for the rotating front wheel housing  

 

  [see front wheel maintenance section]

3.0 Assembling Your Buggy

 

3.1 Attaching the Front Wheels

 

The two front wheels need to be attached to your MGI Quad 
Buggy. There is no difference between each front wheel so either 
can be placed on the left or right side. Simply line up the silver pin 
on the front wheel  with the buggy and push into the frame until 
you hear a positive click. You can test the wheel is in position by 
pulling firmly on the wheel. It should not move out of position. 

3.2 Attaching the Rear Wheels

Step 1.

 On the wheel, slide the release button across.

Step 2. 

You will notice you need to match up the inner female slot 

of the axle and the male of the wheel. When placed in position 
simply release the  button. You will notice you hear a “click” when 
the wheel is properly secured. To check that the wheel is properly 
in position pull on the wheel. If it is properly in position it will not 
slide off. Repeat for the right wheel.

MGI Hunter™ Quad 

User Manual

 

05

04

L

R

Содержание Hunter Quad
















Отзывы:

Похожие инструкции для Hunter Quad