MGG DTC 600, Руководство пользователя

Страница: 4 / 12

4

Receiver Indicator Light:
(A) When the Collar Receiver is charging the light will be a solid red. It switches to green
when fully charged.
(B) In standby status the Receiver Indicator Light will flash green periodically.
(C) Stimulation Buttons pressed on the Remote Transmitter will cause a green light to
appear on the Collar Receiver.
(D) Initiating the pairing process of the Remote Transmitter and Receiver Collar will produce
a solid green light.
(E) Powering off the Collar Receiver will give off a red light.
Operating Guide
Step 1 - Prepare the Remote Transmitter
Charge the Remote Transmitter
1. Uncover the Transmitter Charging Jack by lifting the Rubber Cover.
2. Insert the charging connector into the Charging Jack.
3. Plug the charger into a standard wall outlet.
4. A solid red light will appear on the Transmitter indicating that charging is occurring.
5. Once charging is complete the solid red light will turn to a solid green light.
6. Replace the Rubber bung to protect the Transmitter Charging Jack.
Note: Before first use charge the Remote Transmitter until completion of the charging process.
Powering on and off the Remote Transmitter
To power on the Remote Transmitter rotate the Intensity Dial so it is no longer selecting “off.” If done
correctly the Transmitter Indicator Light will be flashing green.
To power off the Remote Transmitter rotate the Intensity Dial to select “off” and the Transmitter
Indicator light will cease flashing.
Step 2 - Prepare the Collar Receiver
Charge the Collar Receiver
1. Uncover the Collar Receiver Charging Jack by lifting the Rubber bung.
2. Insert the charging connector into the Charging Jack
3. Plug the charger into a standard wall outlet.
4. A solid red light will appear indicating that charging is in progress.
5. Once charging is complete the solid red light will turn to a solid green light.
6. Replace the Rubber bung to protect the Collar Receiver Charging Jack.
Powering on and off the Collar Receiver
To power on the Remote Collar Receiver align the Remote Transmitter Pairing Receptacle with the
corresponding Collar Receiver Pairing Receptacle. Once the Receiver Indicator Light is green separate
the two Pairing Receptacles. The Collar Receiver is now on.