MGE UPS Systems EPS 8000, Руководство пользователя, Страница: 44 / 54

3.3 Preventive Maintenance
The following preventive maintenance routines should be considered the minimum requirements; your
installation and site may require additional preventive maintenance to assure optimal performance from
your installed EPS 8000 and associated equipment. These routines should be performed twice a year
(more often if required). We strongly recommend contracting MGE Customer Support Services for
preventive and remedial maintenance.
The technician or electrician performing preventive maintenance on the UPS must thoroughly read this manual, and
reference the EPS 8000 Installation Manual for Single Module and Shared systems (MGE part number 86-132215-
00) or the EPS 8000 Shared Systems Users Manual, (MGE part number 86-132216-00), to become familiar with
the indicators, controls, and operation of the EPS 8000 UPS systems.
a. Isolate and de-energize all EPS 8000 equipment for all maintenance operations.
b. Ensure that all equipment is clean and free of loose dust, dirt, and debris. The exterior of the enclosures
may be cleaned with a mild solution of soap and water, lightly applied with a lint-free cloth.
c. Inspect the air intake and exhaust plates and clean as required. Verify that air flows freely through the
equipment. Clean the air intake and exhaust plates, and the enclosure interior, with a vacuum cleaner.
d. The EPS 8000 module is equipped with air filters that should be changed at regular intervals. Inspect the
filters regularly to determine how long the filters will last in your installation.
e. Initiate the start-up procedure, as described in the User’s guide.
f. Test the main operating sequences as applicable to your equipment configuration and installation.
3.4 Replacement Parts
There are no user replaceable parts inside the EPS 8000.
Three levels of replacement parts are available for the EPS 8000 UPS. The three levels are designated A, B, and
C. The level that you should keep on hand for your installation will vary depending on the type of maintenance
planned on site, and the configuration of your UPS system. Having the replacement parts on hand will prevent any
unacceptable delays (due to time involved obtaining spare parts) during critical periods, such as system start-up.
Any items used during start-up will be replaced by MGE at no charge. Contact MGE Customer Support Services for
specific recommendations. A description of each level is provided below:
Level Description
A This level of replacement parts consists of consumable items, specifically fuses and air filters. It
is recommended to have these items on hand during installation of the UPS systems, including
initial start-up.
B This level of replacement parts is recommended when the user can tolerate short-duration UPS
down-time to obtain replacement parts in the event of a major UPS failure. This level of replace-
ment parts consists of consumable items, specifically fuses, air filters, an inverter leg, and the
most critical circuit board assemblies.
C This level of replacement parts is recommended when the user can tolerate only a minimum of
down-time in the event of a major UPS failure. This level of replacement parts consists of consum-
able items, specifically fuses, air filters, an inverter leg, and a complete set of circuit board
assemblies.
Maintenance
EPS 8000 UPS Single Module
page 3 —2